Home > Knowledge > Content
Cutting machine technical parameters
- Jun 07, 2018 -

One: Machine Introduction
The  slitting machine is mainly used for slitting large rolls of mother  rolls into products of different widths, and can have the effect of  checking the quality of products. Its main features are as follows:
1、 Unwinding optical correction, high precision; control mode is divided into two files: manual file and automatic file
2. There are two kinds of winding methods: surface winding and center winding;
3, retractable roll tension using automatic tension control; control mode tension feedback control and taper control.
4. Two kinds of slitting tools: round knife cutting and air knife cutting, reliable quality, convenient adjustment;
5. Using surface center coiling, coiling quality is uniform and stable;
6, fixed-length automatic shutdown, length meter automatically;
7, with a trimming device, edge material discharged by the fan;
8. Suitable for slitting narrow strips (insulation materials, mica strips, films, etc.) for various thin coils
Two: Machine Scope:
1. Applicable substrate: mica tape, paper, insulating material and film slitting
2. Applicable industries: related industries with various insulating materials, special electrical paper, and thin films
3, applicable process: sub-disc, finished product inspection, finished product sub-coiling, process opening
Three: The main technical parameters:
1, the machine speed (maximum): 150m/min
4, the largest diameter of unwinding material Φ600-Φ1600
5, the largest reel of winding: Φ500-Φ1200
6, the minimum cutting width 6mm
7, cutting accuracy ±0.1mm
8, the total power 10KW
9, Weight ~ 3500KG
The cutting machine's intelligence is reflected in three aspects:
1. Intelligentization of process expert functions
2. Intelligent operation expert functions
3. After-sales service expert function.
principle
1. The  paper slitting machine will use a fixed-length slitting control to cut  the entire roll or entire length of raw materials into fixed lengths,  such as plastic packaging materials, packaging cartons, steel plates,  films, leather, wood chips, etc.
2. The  cutting length can be set continuously. If there is an error in the  actual cutting length, it can be easily calibrated by setting the  parameters.
3. Paper  slitting machine slitting control is divided into two kinds: static and  dynamic slitting: when the set length arrives, it will stop accurately,  and then it will be processed by static slitting, and will be restarted  after slitting; when the set length arrives, it will not be stopped. Cutting signal, slitting machine dynamic cutting process in the process of material movement.
Structural advantages
The  middle of the paper tube slitting machine is equipped with a main shaft  of a processing paper tube. The front end of the main shaft is fixed on  the base by a set of bearings. A belt pulley is mounted in the middle  of a group of bearings; a compression cylinder is installed near the  base, and the cylinder is supported. A set of support rod bearings are mounted on the upper end of the rod to support the spindle.
A  main cutter shaft is mounted on the upper end of the paper tube  slitting machine, and a plurality of blades are arranged on the main  cutter shaft, and are arranged according to a certain gap; a supporting  frame of a main cutter shaft is also arranged on the top of the paper  tube slitting machine; A supporting cylinder is installed in the middle.
The structural advantage of the paper tube slitting machine fills the gap in automatic pipe cutting machine technology.

Previous: No Information

Next: Cutting machine introduction