Home > Knowledge > Content
Technical requirements of operation slitting Machine
- Sep 01, 2017 -

1. Cut the entire volume or the entire raw material to carry on the fixed length slitting processing, for example the plastic packing material, wrapping paper box, steel plate, film, leather, wood chip and so on slitting processing, all must use to the fixed length slitting control.


2. Fixed-length slitting control is divided into static and dynamic slitting two kinds: when the set length arrives the accurate shutdown, then the static slitting processing, after slitting starts the operation; At the set length arrives, does not stop to emit the cutting signal, the slitter machine in the material movement process dynamic cutting processing.


3. The most important performance index of fixed-length slitting is the precision of slitting, and the consistency of finished product length is good.


4. The cutting length can be set continuously, if the actual cutting length has error, it is easy to calibrate by setting the parameter.