2000mm Fabric Strip Cutting Machine
The fabric strip cutting machine is for slitting fabric Jumbo Rolls, such as Nylon, Textile, Care label, Polyester and so on into small rolls with min 10mm width
fabric strip cutting machine FY2000C could slit different width in same time
With 20 years' experience in design and R&D, production and innovation in fabric slitting field, the fabric strip cutting machine FY2000C has widely used in care label materials, decoration ribbons, garment fabrics, home textiles, medical fabrics, industry fabrics.
A. Working speed 80m/min
B. Min. sitting width 10mm
C. Best stable working
D. Good edge slit
|2 MATERIAL WIDTH||MAX 2000 MM ( Max.3000MM customized)|
|3 UNWIND DIA.||600MM (MAX.)|
|4 UNWIND SHAFT DIA.||76MM (3 INCH) OR 40MM(1.5INCH)|
|5 UNWIND SHAFT TYPE||AIR SHAFT 1 PC|
|6 REWIND DIA.||300MM(MAX)|
|7 REWIND WIDTH||10MM-2000MM|
|8 REWIND SHAFT DIA||76MM( 3 INCH) OR 40MM(1.5 INCH)|
|9 REWIND SHAFT TYPE||AIR SHAFT 2 PCS|
|10 SLITTING UNITE||COOL CIRCLE BLADE 30PCS|
|11 MECHANICAL SPEED||120M/MIN (MAX)|
|12 WORKING SPEED||20-120M/MIN (MAX) ( DEPENDS ON MATERIAL)|
|13 POWER||380V, 3 PHASES 50Hz, 10KW|
Free Sample Test
1. Machine installing training on our factory
2. Standard operation training
3. Daily maintenance training
if customer requirement, our engineers can also be sent to customers Factory guiding machine Installing.
After Sales Service
Regular customer return visit service
Our service team will visit old customer in every two years. Guiding and helping customer test and check machine running.
Consumable and Spare parts
If any needs on consumable or spare parts, please contact our Specialist of after-sales.
A rapid response and spare parts will arrange in the first time.
Question during operation
For any questions during daily operation, please contact our Specialist. Our engineer will reply you within 24 hours.
Q: Can I use this machine to slit other fabrics?
A: If your Fabric has similar feature as non-woven fabric, then it can be slit by this machine. Better you can send your material to us and we test for you.
Q: What's the most vulnerable part of this machine?
A: Blade , Shaft are the most vulnerable parts , we suggest you change it in every 2 years.
Q: How soon will you prepare the shipping?
A: Normally within 2 weeks when all is done.