Hot Foil Roll Slitter
a good design hot foil roll slitter for converting hot stamping foils, cold foils,metallic foil,coding foil,kurz foil,univacco foil and so on.
It is a good quality meanwhile cheap price hot foil roll slitter, covering maximum 1300mm width jumbo roll. It can rewind on 1 inch and 3 inch cores. The finished rolls are good shape, no dust. And machine is very fast working in 400m/min speed when rewind on 3 inch core, it is highly welcomed by those who have slitting experience.
A. Rewind on 1 inch and 3 inch cores
B. High Speed up to 400m per minute
C. No dust during slitting work
D. Robust construction
Hot Stamping Foil, Cold stamping foils
Mother Roll OD
800mm(Max.) Optional: 1000mm
Unwind Core Size
3" and 6"
Magnetic Powder Brake
1" and 3" Shaft
Razor Blade Optional: Shear Blade
380V, 3Phases, 50Hz Or Customize
-Shaftless 3 inch and 6 inch when load 1300mm rolls
-Motor or hydraulic unit pick up mother roll
-Edge Guiding unit track material edge
-Razor slit in air
Or Shear Blade
-1" and 3" Rewinding Shaft
-Motor Controlled Rewind
We have guarantee as following:
● Machine key parts are guaranteed for one year, the parts are mainly: Motor, PLC, touch screen, magnetic powder clutch
● Machine installation service.
A. If you like pay the air tickets, food, hotel and 120USD/day subsidy, our engineers are ready to go overseas at any time for service.
B. You also can send your operators come to China for training
● Whole life technical support.
Q.:How you guarantee machine quality is good ?
A.:We keep close attention when machine production and when machine test. We slit exact materials to guarantee machine is working 100% before shipping.
Q: Can I go to your customers factory see its working ?
A: Yes, if interested, we can discuss with our customers to see whether they can arrange your visit, also you can come to China to see our production and machine working.
Q.:How many years guarantee ?
A.: One year guarantee for machine key parts;
Q:How many months do you need to finish the machine ?
A: Max.3 months.
Q: Which country have you sold this slitter ?
A: Italy, Switzerland, Netherlands, USA
What is a good slitter?
The most difficult points for a slitter is the speed and the width.
It is easy to make a slitter whose speed is less than 300m/min, but 500m/min, 600m/min, 800m/min or even 1000m/min, is not all company can do.
The other point is the effective slitting width, the slitter who is narrow than 1600mm is easy to make, but 1800mm,2000mm,or even 3500mm is very difficult to make.
We are proud that we can do all the speed and width slitter.
Why Choose Us?
--Stable & Professional Slitter Made by Over 20 Years Experienced Engineer.
--Complete and Cautious Test and Check Before Shipment.
--Detailed Instruction and Manual for All of Our Machines.
--Machine Installing and Worker Training Service.
--Whole-Life Free Technical Support.
--Regular On-site Routine Inspection.
--One Year Guarantee for all Listed Key Parts of Our Slitter.