Lamination And Rewinding Machine

This machine is a new generation product integrating optics, electricity and gas. It can be used for slitting and rewinding high precision wire rod of various paper, film, cellophane, aluminum foil, self-adhesive and plastic PVC.

The slitting machine is a pre-press and post-press equipment that cuts a large roll of paper, film, non-woven fabric, aluminum foil, mica tape and other thin materials into small rolls of different widths. It is often used in paper-making machinery and printing and packaging machinery.

The tension control system of the slitting machine is simple and easy to debug, and the constant tension control is basically not affected by the speed, which can realize high-speed slitting;

In the modern packaging industry, the slitting machine is a relatively important equipment often used before and after printing. It is mainly used to slit raw materials, such as paper, plastic film, etc., before printing. This is a process that the raw material manufacturer must complete in order to meet the width requirements of customers and other packaging manufacturers. The most widely used slitting process after printing and lamination is to use a slitting machine to slit the printed and composite films with fixed widths of multiple patterns into finished film rolls to adapt to the subsequent automatic packaging and bag making processes.

3520

Feature

1. The two coiler motors cooperate with the main motor for three motor linkage control, and the main motor blocks the discharging and coiler motor to control the tension. The finished product has stable tension and beautiful appearance.

2. The operation interface adopts LCD touch screen, which can directly set various parameters and operation conditions on the screen.

3. AC motor and frequency converter are used to make the acceleration and deceleration stable and fast.

4. Slip type inflatable shaft is optional, which can be replaced at any time according to different materials.

This type of slitting machine is suitable for slitting PE, PP, PET, PVC and other plastic films, composite films, films, color printing films, web paper, etc. It is an ideal model for film and sheet secondary processing and color printing and packaging enterprises.

The rewinding shaft adopts an air expansion shaft to rewind and is independently driven by two vector frequency conversion motors. The rewinding tension is controlled. According to the rewinding diameter, slitting thickness, tension and other parameters, the automatic tension increase is realized by PLC calculation. (Optional slip air shaft)

Basic specification

1	SLITTING WIDTH	300MM-1600MM
2	SLITTING THICKNESS	12-250 UM
3	UNWIND DIA	MAX800MM OPTIONAL: MAX 1000MM
4	UNWIND CORE I.D	SHAFTLESS 3 INCH AND 6 INCH
5	REWINDING DIA	MAX600MM
6	REWINDING WIDTH	MINI30MM
7	REWINDING CORE I.D	3 INCH AIR SHAFT AND 1 INCH AIR SHAFT OPTIONAL: 6" AIR SHAFT, 3" OR 6" DIFFERENTIAL FRICTION AIR SHAFT
8	SLITTING UNIT RAZOR BLADE	OPTIONAL: SHEAR BLADE (EASY SET SHEAR BLADE SYSTEM)
9	MECHANICAL SPEED	MAX450M/MIN
10	WORKING SPEE	MAX400M/MIN
11	MACHINE FRAME THICKNESS	50MM
12	METER COUNTER	METER COUNTER
13	WASTE EDGE UNIT	AIR BLOWER
14	POWER SOURCE	380V,3 PHASE,4 WIRES 50Hz
15	PNEUMATIC SOURCE	0.7MPA
16	LASER POSITIONING	8 PCS
17	MACHINE SIZE (REF. ONLY)	3250mm(not including unloading frame tre)×2550mm×1970mm 4490mm(including the unloading frame tree)×2550mm×1970mm
18	FLOOR SPACE(REF.ONLY)	4500MM*3300MM
19	N.W/G.W (REF. ONLY)	3500/4000

Correctly adjust the slitter blade:

Every time a new blade is installed, or the old blade after sharpening, the height of the knife bed should be manually adjusted to adjust the cutting amount of the blade, so as to avoid accidents caused by deeper cutting caused by the higher height of the new blade. When cutting the knife, the main motor must be turned off, and the operation can only be carried out after stopping the operation!

Details

Hot Tags: lamination and rewinding machine, China, manufacturers, suppliers, factory, customized, wholesale, price, cheap, made in China