Precautions when using a die-cutting machine
Pay attention to the following points when using a die-cutting machine:
1. Turn the transmission shaft with a wrench to make the press frame reciprocate several times, and observe whether there is any jamming.
2. Whether the dry insulation of the motor and electrical parts is good.
3. Whether each safety protection switch is normal and reliable.
4. Lubricating oil should be injected before operation.
5. Check whether the screws and nuts of each part are loose, and solve them in time if found.
6. Check whether the brake is flexible during the rotation of the equipment.
7. After the power is turned on, press the motor start button first, and the machine can be put into operation after the flywheel rotates for a certain period of time.
8. When the distance between the base plate and the press frame plate needs to be adjusted, the power supply should be cut off to ensure safety.
9. It is strictly forbidden to grab paper between the base plate and the press frame plate
