Slitter is an important equipment in the paper processing industry, which is used by paper manufacturers almost every day. If there is a fault, it will effect the production process, and the manufacturers will also lose some money. Generally speaking, if you do not pay attention to the daily maintenance, the slitter will often have some difficult problems. In order to solve these tiny problems from time to time, we summarized the following common problems for your reference, hoping to help the family
1. The paper Slitter is not reeled properly. This situation is mostly due to the inapplicability of the paper core. As long as the paper core meeting the required inner diameter is replaced, in addition, in the process of rewinding, the use of the rewinding press roll can also avoid the uneven rewinding of the slitter.
2. The material of slitting and coiling is wrinkled. This is mainly because the winding tension is not correct. Adjust the proper winding tension of the paper Slitter. The roll is used for winding and the slitter package is overpressured before entering the winding core.
3. The meter count is not accurate. You can solve this one by making the meter wheel and two wheels touch the feeding rubber roller at the same time