Cutting machine is more and more widely used in industrial production, after the use of cutting machine, how to maintain the cutting machine. With small make up to understand it.
General maintenance
1. After the operation, use tap water to wash and dry the rock residue on the work room and workbench surface.
2. Regularly clean the oil stains on the dragboard, guide rail and guide rail drive screw, and timely add lubricating oil.
3. After all the work is finished, move the blade about 10cm forward and reset the swing arm of the travel switch.
4, after the use of the cutting machine, such as in a certain period of time not to use, should be the blade and fixture moving parts and some rust areas in the machine coated with a layer of lithium.
Daily maintenance:
1. The dirt of the machine tool and guide rail must be cleaned every working day to keep the bed clean. The air source and power source should be turned off at the end of work, and the excess air in the pipe belt of the machine tool should be emptied at the same time.
2. If leaving the machine for a long time, turn off the power to prevent non-professionals from operating.
3. Pay attention to whether there is lubricating oil on the surface of transverse and longitudinal guide rail and rack of the machine, so as to keep it well lubricated! Iii. Weekly maintenance and maintenance:
1. The machine shall be thoroughly cleaned every week, including horizontal and longitudinal guide rail, transmission gear rack cleaning and lubricating oil filling.
2. Check whether the rail wipers are working normally and replace them in time if abnormal.
3. Check whether all cutting torches are loose, clean up the garbage at the ignition nozzle, and keep the ignition normal.
4. If there is an automatic height adjustment device, check whether it is sensitive and whether the probe should be replaced.
5. Check whether the plasma nozzle and electrode are damaged and need to be replaced.
After reading, how to do maintenance of cutting machine, cutting machine daily maintenance and maintenance how to do something about it.