APPLICATION
Hangzhou Havesino Imp. & Exp. Co., Ltd. is a professional thermal transfer ribbon slitting equipments in China over 12 years.
TTR slitting machine is suitable for rewinding various ribbons. The coiling tension is controlled by the Servo motor. It can automatically count, automatically grade the speed regulation, and automatically rotate the shaft. It has the characteristics of high efficiency and high precision. It adopts an automatic bracket to effectively control the swing of the pick-up disc during high-speed operation. It can be equipped with 1 and 1/2 rolls.
Our TTR converter machine is the most cost effective slitter in China.
Machine speed: 250m/min(it's not only a design speed, machine can keep working on this speed)
Machine size: 2000*2300*1700mm
Machine main steel sheet thickness: 30mm
Machine Weight: 1600kgs
Unwind:
Shaftless clamp fixing system for Jumbo roll
Max Jumbo width: 1010mm (other width on request)
Jumbo outer diameter: 540mm
Jumbo core diameter: 6 inch (other diameter on request)
Max Jumbo weight: 200 kgs
Electronically Jumbo left/right side adjustment
Servo drive system, automatic unwind tension control
Lights for ribbon quality monitoring
Rewind:
Two rewind positions, Turret each position
Max rewind diameter: 125mm
Rewind width: 25mm-1010mm(smaller width on request)
Two servo driver system for winding positions, automatic tension control.
Pneumatic driver pressing roller for ribbon winding
5pcs 1 inch air expanding shaft
Option: 5pcs 1/2 inch air expanding shaft.
TTR converter machine thermal transfer ribbon slitting machine achieves a small footprint, is easy to use, and can run production stably when connected to a 2-phase power supply. The intelligent and convenient operation mode makes the slitting easier. The main controller adopts German Siemens programmable PLC, which has fast running speed, high slitting precision, smooth winding and uniform tension control.
Siemens plc is with high reliability, strong anti-interference ability.The reliability of the plc is the key performance of electrical control equipment. Siemens PLC adopt modern large-scale integrated circuit technology, strict production process manufacturing and the advanced anti-interference technology in internal circuit, all these make it high reliable during working. From the perspective of the external circuit of Siemens PLC, electrical wiring and switching contacts have been reduced to hundreds or even thousands of times, and failures have been greatly reduced.
Siemens PLC is easy to learn and use, and is deeply loved by engineers and technicians. As a general industrial control computer, Siemens PLC is an industrial control device for industrial and mining enterprises. Its interface is easy, and the programming language is easy for engineering and technical personnel to accept. The graphic symbols and expressions of the ladder language are quite close to the relay circuit diagram, and the function of the relay circuit can be easily realized with only a small number of switch logic control instructions of Siemens PLC. It opens a convenient door for people who are not familiar with electronic circuits, computer principles and assembly language to use computers to engage in industrial control.
Each newly purchased TTR ribbon slitting machine needs a lot of debugging work after installation. During the debugging process, the most suitable tension interval is found. The data of this tension interval is the key data for the technicians to maintain the equipment in the later stage.
For the daily maintenance of the TTR converter machine, the following points should be paid attention to.
1. The daily maintenance should pay attention to the following five points. The electrical parts should be cleaned and inspected regularly to eliminate hidden dangers in time.
2. The daily maintenance should pay attention to the following five points. TTR slitting machine is completed by slitting and cross-cutting machine, so high-quality slitting and cross-cutting knives should be used.
3. The daily maintenance should pay attention to the following five points. The TTR slitting machine should have daily maintenance, and its standard is smooth, clean, and cleaned in place to ensure that the sliding parts of the equipment are in good condition.
BASIC SPECIFICATION
DETAILED PICTURE
GUARANTEE AND SERVICE
CERTIFICATE
OUR FACTORY
PACKING PICTURES
ABOUT HAVESINO
Hot Tags: TTR Converter Machine, China, manufacturers, suppliers, factory, customized, wholesale, price, cheap, made in China
