Before using the TTR slitter, the main components of the TTR slitter should be inspected and lubricated.
When checking the machine, it is strictly forbidden to use inappropriate tools and unscientific operation methods.
The machine should be thoroughly cleaned and inspected every two weeks;
If the TTR slitting machine is not used for a long time, all bright surfaces must be wiped clean, coated with anti-rust oil, and covered with plastic sleeves throughout the machine.
If the TTR slitting machine stops for more than 3 months, it should be coated with moisture-proof paper on the anti-rust oil. After the work is completed, the equipment should be carefully cleaned, and the exposed friction surfaces should be wiped clean and lubricated;