The slitting machine and the cross-cutting machine, the names of these two mechanical equipment are only one letter different, and they are both used for slitting and processing of articles, but there are essential differences between these two slitting equipment, let me Let me introduce these two devices one by one.
Slitter:
Slitting machine is a kind of mechanical equipment that cuts wide paper, mica tape or film into multiple narrow-width materials. It is often used in papermaking machinery, wire and cable mica tape, and printing and packaging machinery. The slitting machine is mainly used for cutting mica tape, paper, insulating material and film, especially suitable for cutting narrow tape (insulating material, mica tape, film, etc.). The slitting machine is a pre-press and post-press equipment that cuts a large roll of paper, film, non-woven fabric, aluminum foil, mica tape and other thin materials into small rolls of different widths. It is often used in papermaking machinery and printing and packaging machinery. The machine continues to develop from single-motor control to dual-motor and three-motor, which is more stable and efficient when the machine speed is faster.
Cross cutting machine:
The cross-cutting machine belongs to the carton processing machinery. The cross-cutting machine in the corrugated cardboard production line is the mechanical equipment for the cadres to cut the finished cardboard. Its technical performance and equipment adjustment directly affect whether the cutting size of the finished cardboard is accurate, whether the crimping line is broken, and whether the appearance of the cut is smooth and beautiful. The cross cutting machine is suitable for vertical and horizontal cutting of various types of paper. Such as gold and silver cardboard, plain rainbow paper, laser anti-counterfeiting paper, white board paper and various thin paper. It is widely used in horizontal or vertical cutting of trademarks, cigarette labels, calendars, wine boxes, poker, and paper-plastic printing composite materials.
After the above introduction and explanation, I believe that everyone has understood and understood the distinction between the two types of mechanical equipment, the slitting machine and the cross-cutting machine.
