Paper slitting machines have different paper widths during the slitting process. A slitter is a mechanical device that uses paper to seal cartons. The paper cutter realizes automatic transmission, automatic sealing and automatic cutting. For slitters, the top cover can also be folded automatically, but no matter which slitter you use, it won't come off the paper. So what is the widest width of the paper slitting machine?
There are two factors that determine the width of the slitter. One is a paper cutter and the other is a paper guide roller. As the name suggests, the knife determines the width of the paper that can be cut, but this does not mean that the wide knife must cut the width of the paper. In fact, a narrower cutter can also cut wide paper, but this will leave a small piece of paper in the process of cutting paper, which will affect the overall appearance. Therefore, if you need to cut wider paper, or you need to contact the supplier, it is recommended to replace the larger blade.
If there is no problem in the above two situations, after operating the slitter for a certain period of time, the paper tray may protrude from the right side, affecting the slitting width.
1. When starting to operate, the rubber strips at both ends are not tightened. This can be avoided when the machine starts cutting the strip.
2. Because the inner diameter of the iron core added to the iron core is too large, the iron core cannot be locked after the gas shaft expands, and it will slide and bend when rotating. To fix this, check the inner diameter of the paper core while the paper core sleeve is on the intake shaft. size.
