The first step is: find a balance place to put the slitter on the ground, then use the gradienter put on the machine to make the machine put balance. if not balance, you can adjust the screw to make the machine balance.
the second step is fix the machine, once you the machine balance is ok, you can make hole on the ground, then use the expansion to fix the machine on the ground
I think you have 8-10 pcs these expansion fix screw
the third steps: after fix the slitter, you can connect power and air, firstly try all the function and knob, then firstly rewind the material to familiar with the slitter operation.
the fourth step: is to install blade and start to slit