Home > News > Content
Do You Know The Working Principle And Structural Advantages Of The Slitting Machine?
- May 19, 2018 -

The cutting machine is a kind of mechanical equipment which divides the wide sheet, mica belt or film into multiple narrow materials. It is often used in papermaking machinery, wire and cable mica belt and printing and packaging machinery. The cutting machine is mainly used in the division of mica belt, paper, insulating material and thin film, especially for narrow band (insulating material, mica belt, film and so on).


The 1. paper cutting machine should divide the whole volume or the whole raw material into a fixed length cutting process, such as plastic packing material, packing carton, steel plate, film, leather, wood chip and so on, all use fixed length cutting control.

2. the cutting length can be set continuously. If the actual cutting length is error, it is easy to calibrate by setting parameters.

The 3. paper cutting machine is divided into two types: static and dynamic cutting. The cutting machine is stopped at the time of setting, then static cutting, and then restarting and running again. When the set length arrives, the cutting signal is not stopped at the end of the machine, and the cutting machine is cut and cut during the moving process of the material.

Structure advantage of slitting machine

The central part of the paper pipe cutting machine is installed with the main shaft of the processing paper tube. The front end of the spindle is fixed to the base with a set of bearings. A belt pulley is installed in the middle of a group of bearings; a compressed cylinder is installed in the position near the base, and the upper end of the support rod of the cylinder is installed with a support bearing and supporting the main shaft.

The upper end of the paper pipe cutting machine is equipped with a main knife shaft, which is arranged on a number of blades and arranged in a certain clearance. The supporting frame of the main shaft is also set at the top of the paper pipe cutting machine, and the support cylinder is installed in the middle of the support frame.