Knowledge

Here is how shaftless 3 inch change to 6 inch . HN1300/HN1600 with Taiwan Brand Sliding Rail, long life, easy move left and right with heavy material.

EPC Edge Guider HN1300/1600 use Pausource Photoelectric Edge Guider, it does not only can follow the material edge, but also can follow the printing l

Manual waste discharge and automatic waste discharge of label roll die-cutting machine Die-cutting waste discharge is generally divided into automatic

HN1300R working in factory HN1300R is one of our standard and popular rewinder and inspection machine. A. Rewinding width from 50-1300mm B. Could run

Two solutions for separate unwinding rewinder For separate unwinding slitter rewinder . We offer two solution for feeding material : From above and be

The slitting machine and the cross-cutting machine, the names of these two mechanical equipment are only one letter different, and they are both used

The rewinding of the slitter is the upper rewinding roller, the lower rewinding roller, the rear rewinding roller and the rewinding roller of the sequ

The working principle of the slip shaft is roughly divided into two types. One is the same principle as the air shaft, which uses the expansion and co

1000MM Dia and 1000KG weight jumbo roll loading For HN1600 , There is no problem when its unwinding diameter reaches 1000MM and weight 1000KG .

Information of Adhesive Label Compared with traditional labels, self-adhesive labels have the advantages of no need to brush glue, no paste, no need t

Precautions when using a die-cutting machine Pay attention to the following points when using a die-cutting machine: 1. Turn the transmission shaft wi

Here is the steps of loading jumbo roll: 1.Use a forklift or other tool to place the Jumbo roll between the two chucks . 2.Move the unwinding arm to t